Keep the Work Surface Clear

A wall-mounted salon mirror, work ledge and focused side return for the objects used most often.

Concept development with a hypothetical brief and AI-generated illustrations; configuration and feasibility require design and sample review.

Give combs and clips a place—not the whole worktop

For a wall-aligned styling station, a trolley can handle the wider kit while the fixed station keeps a limited set of combs and clips close at hand. The mirror, ledge and tool zone are conceived as one coordinated assembly; chairs and trolleys are not an established supply scope.

Clear central reflection

Keep shelves and frequently used objects away from the main viewing area.

A useful work ledge

Think of the ledge as a temporary task area, not storage for everything.

Storage at the task

Two low bins near the ledge keep selected tools close rather than filling an empty tower.

From a full frame to a focused tool zone

Early exploration · The initial sketch considered a plain ledge and a side-column tool zone. A plain ledge can suit a workflow where a trolley already handles the return; a side zone may make sense when the actual routine benefits from fixed storage.

The sketch began with a longer frame and areas above and below that were not being used. The current direction shortens the tool backplate and removes the low crossbar, keeping storage close to the work ledge. The earlier sketch shows the decision process, not an alternative final support specification.

Why this configuration leads

Two small trays are intended for selected everyday items, keeping the centre of the reflection clear without building an empty frame around it.

The trade-off is side width and additional surfaces to clean. Choose an organiser size only after checking the actual objects and how they are handled.

Grasp and return

Try real combs and clips; check hand clearance and retrieval without reaching across the reflection.

Sit and turn

Use a physical mock-up to assess chair rotation, ledge depth, underside and side projections.

Clean and service

Review tray interiors, joints, cleaning access and material compatibility. Removable trays have not yet been established.

Neither the ledge, trays nor catch dish are specified as hot-tool holders. Any such use needs equipment-specific material and temperature review.

When to choose the simpler version

If a trolley already does the job, wall width is limited or a side return conflicts with the room, omit the fixed tool storage. If an existing worktop works well, reconsider the ledge rather than adding more parts.

Mirror proportions and ledge

Review mirror proportions, useful ledge depth and the preferred tool-zone side. The current concept shows a right-side zone; it is not established as user-reversible.

Finish and lighting

Compare coordinated finish samples. Lighting is a separate study; this concept is unlit.

Before a sample is specified

1. Agree the real tool list and test viewing, side reach and chair movement with a full-scale mock-up.

2. Develop glass retention, frame joints, ledge support, tray attachment and the wall-fixing approach.

3. Review material and finish samples, cleaning, service access and packing protection; define what the sample needs to demonstrate before a production quotation.

Develop this wall-station design

Tell us your preference for a plain ledge or side return, intended quantity and destination country, and share wall, chair and trolley references. Note which objects must stay at the fixed station versus the trolley, along with must-haves and finish preferences.

Design refinement and sample scope come before any production quotation; a quote is not automatic.

Back to the Two-Station Salon Study

Discuss This Wall-Station Design